본문 바로가기

DIY Sketch

트랜지스터, 저항, 다이오드, 모스펫 등의 양부판별을 위한 다기능 멀티테스터 LCR TC-1

반응형




트랜지스터, 모스펫, 저항, 다이오드와 같은 반도체 소자의 양부를 판단할 수 있는 테스터기다.
일반적인 테스터기가 저항과 다이오드 커패시터를 테스트할 수 있지만, 사용에 제한적이고 어려운 것들도 많은데,,
이 테스터기로 간단하게 테스트가 가능하다.

다만,,
기존 테스터기는 리드봉만 가져다 대면 바로 수치를 볼 수 있지만,,
이 녀석은 테스팅에 걸리는 시간이 있어 조금은 답답할 수 있다.


필자는 필요보다는 부담되지 않은 가격이라 공부차원에서 겸사겸사 구입해보았다.
의미없지만 필자가 구입한 가격은 알리익스프레스에서 송료포함 14달러였다.


+
알리에서 검색해보면 비슷한 종류의 테스터기가 많은데,,
9V전원을 사용하는 것들과 케이스가 없는 기판만도 판매한다.

이 제품은 충전 가능한 리튬이온 배터리를 포함하고 있고 하우징이 있는 완제품이다.




먼저 스펙을 살펴보자.

Self test with automatic calibration
Size: 70*90*26m/ 2.71x3.58x1.10 inch
Display: 3.5 inch TFT Screen, Color Screen
Diode Range: less than 4.5V
Zener Diode:Transistor Detect Area: 0.01-4.5V
Zener Diode Detect Area: 0.01-30V
Triac Range: IGT less than 6mA
Capacitance: 25pF-100mF
Resistor: 0.01-50MΩ
Inductance: 0.01mH-20H
Power Voltage: 3.7V
Power: Built-in Rechargeable Lithium Battery
 
Measurement results using TFT graphic display (160x128)
One-button operation
Auto power off (timeout setting)

Warning: Built-in lithium-ion battery, it is strictly forbidden to immerse the tester in water or near heat source!
Warning: For your personal safety, please strictly observe the specifications and precautions for using lithium-ion batteries!
 
Transistor Detection:
After the power-off state or test is completed, put the test component into the transistor test area of ​​the test socket, press the lock handle, press the multi-function key, the tester automatically measures, and the measurement result is displayed at the end of the test.
Warning: Always discharge the capacitor before connecting them to the tester! The tester may be damaged before you turn it on!
Warning: We do not recommend using a tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged!
 
Component placement:
The test socket is divided into transistor and Zener diode test areas, as described in 1.1.

뭐 이런저런 잡다한 기능이 많이 있다.
천천히 살펴보기로 하고,,,

일단 외관을 보자.




살펴보기


구입 한지는 꽤 되었으며,,
받자마자 보호필름을 잘라서 붙여주었다.
소자의 리드가 짧은 경우 핀과 클립이 달린 케이블 3개가 있는데,,
수축튜브로 마감을 해주었다.

그리고 짧은 충전 케이블이 포함되어 있다.









<셀러페이지 발췌>


KAA는 제너다이오드 테스트를 위한 슬롯이고,
나머지는 1,2,3번에 연결하면 된다.
같은 숫자끼리 연결되어 있으니 3개 다리를 가진 소자까지 테스트할 수 있다.






하단의 모습이다.
충전 상태를 표시하는 충전용 LED와 마이크로 USB 핀이 있다.



케이스를 열어보았다.
하단부 케이스에 리튬배터리 350mAh가 부착되어 있고,
왼쪽 기판에서 레귤레이터로 승압해서 사용하는 것 같다. (추정)



전면부다.
TFT LCD와 슬롯 IR 센서 그리고 노란색의 택트 스위치가 달려있다.
문제가 될만한 특이점이 보이지는 않는다.



테스트


저항테스트


 MOSFET테스트







LED 테스트


커패시터 테스트


제너 다이오드 테스트



충전중





최근 적출품을 모아둔 박스에서 N채널 모스펫과 P채널 모스펫을 찾는데 손쉽게 찾을 수 있어 편리했다.
양부 판단뿐만 아니라 데이타시트를 볼 필요없이 바로 용도를 알 수 있다는 점에서
추천하고 싶다.


이상,,
궁금해서 사 본 다 기능 테스터기의 간단 리뷰를 마친다.





반응형


Recent Posts
Popular Posts
Recent Comments